亚洲综合色区另类AV-亚洲综合色区另类AⅤ-无码专区亚洲综合另类-另类亚洲综合区图片小说区

<samp id="rg2u4"></samp>

<table id="rg2u4"><ruby id="rg2u4"></ruby></table>

      
      <pre id="rg2u4"></pre><td id="rg2u4"></td>

      1. <acronym id="rg2u4"><label id="rg2u4"></label></acronym>
          <acronym id="rg2u4"><label id="rg2u4"></label></acronym>

          High-temperature conductivity

          Location:Home > Products > High-temperature conductivity > Text
          This product is a two-component,gold,high temperature resistance to 145℃ ,copper conductive epoxy adhesive, This production is two-parts,golden,high temperature resistant,good conductivity,high temperature reached 145 degree.

          一、Introduction
          This product is a two-component,gold,high temperature resistance to 145℃ ,copper conductive epoxy adhesive,
          This production is two-parts,golden,high temperature resistant,good conductivity,high temperature reached 145 degree.Apply to conductive adhesive of all kinds of difficult to weld materials in high temperature.For example:motor carbon brush,cable joint,integrated circuits,transistors,light emitting two tubes,Ptc ceramic heating element,radio industry wire .
          二、Product performance


          Product Number


          Physical Condition


          Color


          (g/cm3)Density


          (Mpa)
          TensileStrength

          (Mpa)
          Shear Strength

          (Ω.cm)Volume Resistivity

          (℃)WorkingTemperature

          JLD-5012AB

          Paste+liquid

          gold

          1.92

          12

          15.26

          10-2~10-3

          -40~120

          1. Field of application

          Apply to the material of metal,ceramic,glass to thermal conductive adhesive,and the bonding for electric equipment of high temperature resistance ,electronic components.It can be used as a conductive heat layer as well.
          四、Usage
          1、Desing,processing adhesive sealing interface, the design of joint is socket.
          2、To treat the surface coarsening and cleaning,decontamination,the gap is 0.2~0.5mm.
          3、Configuration glue:Weighing the solid and liquid according to the proportion , mixture and mix thoroughly to a flowable paste ,and use it up in 20 minites.
          4、Solidify:To apply the mixed glue to the cleaned object wating to bonded,laminating and positioning.
          五、The curing procedure
          1、Weigh two components,according to the proportion of solid and liquid(3~3.5g: 1ml),mixed. 
          2.To apply the mixed glue to the object wating to  bonded.
          3.Put it in the room temperature for 12 hours after bonding.
          4.Heated to 80 ℃, constant temperature for 2 hours.
          5.Heat to 150℃ again,and constant temperature for 2 hours.
          6.Slow cooling.
          六、Packing:100g*25/branch   500g*6 set
          七、Precautions:
          1、If users require special packaging needs further deliberations.
          2、The company has the rights of retaining the best process and changing product specifications in new product development period.
          3、Due to unpredictable factors during the actual use , we recommend you try carefully before using the trial ,bulk order after passing quantities.

          Update Time:2014-03-31 16:18:46Hit:6127Size:T|T
          點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息
          亚洲综合色区另类AV-亚洲综合色区另类AⅤ-无码专区亚洲综合另类-另类亚洲综合区图片小说区