亚洲综合色区另类AV-亚洲综合色区另类AⅤ-无码专区亚洲综合另类-另类亚洲综合区图片小说区

<samp id="rg2u4"></samp>

<table id="rg2u4"><ruby id="rg2u4"></ruby></table>

      
      <pre id="rg2u4"></pre><td id="rg2u4"></td>

      1. <acronym id="rg2u4"><label id="rg2u4"></label></acronym>
          <acronym id="rg2u4"><label id="rg2u4"></label></acronym>

          High-temperature conductivity

          Location:Home > Products > High-temperature conductivity > Text
          Two-component,inorganic silicate material,cured stuff is gray-white. Electrically conductive material is silver, heat-resistant temperature is 1220℃.Water resistance,acid resistance, organic solvents resistance,good electrical conductivity.

           Product Performance


          Product Number

          Physical Condition

          Color

          (g/cm3)Density

          (Mpa)
          TensileStrength

          (Mpa)
          Shear Strength

          (Ω.cm)Volume Resistivity

          (℃)WorkingTemperature

          JLD-5015

          Paste+liquid

          Gray-white

          2.45

          8.54

          7.42

          10-2~10-4

          -40~1220Application areas

            Application areas
          This product apply to the material of heat conductive adhesive in metal, ceramic, glass , as well as electric equipment,electronic complnents of high temperature resistant ,  and electrically and thermally conductive coating.

              Method of use

          1.Design and processing adhesive sealing interface.

          2.  To treat the adhesiving surface roughly,and then cleaning and decontamination. 

          3.Configure glue:Weighing the solid and liquid according to the proportion , mixture and mix thoroughly to a flowable paste ,and use it up in 20 minites.

          4.Solidify:To apply the mixed glue to the cleaned object wating to bonded,laminating and positioning.
           Curing procedure
          1.Weigh two components,according to the proportion of solid and liquid(3~3.5g: 1ml),mixed. 
          2.To apply the mixed glue to the object wating to  bonded.
          3.Put it in the room temperature for 12 hours after bonding.
          4.Heated to 80 ℃, constant temperature for 2 hours.
          5.Heat to 150℃ again,and constant temperature for 2 hours.
          6.Slow cooling.
          Packing:100g*25/branch   500g*6 set
          Precautions:
          1、If users require special packaging needs further deliberations.
          2、The company has the rights of retaining the best process and changing product specifications in new product development period.
          3、Due to unpredictable factors during the actual use , we recommend you try carefully before using the trial ,bulk order after passing quantities.

          Update Time:2014-03-31 16:21:14Hit:6501Size:T|T
          點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息點擊這里給我發消息
          亚洲综合色区另类AV-亚洲综合色区另类AⅤ-无码专区亚洲综合另类-另类亚洲综合区图片小说区